Amelinus – A wireless mouse usually consists of several components, in its use the mouse is assisted by a USB type wireless dongle to connect to a computer. The mouse sends signals to the adapter connected to the computer to follow your commands. It’s a simple setup that works well most of the time.

If you are having problems as described above, this tutorial is the answer, how to troubleshoot a wireless mouse on a computer so that it is up and running again.

Troubleshooting Wireless Mouse

Usually, the initial symptom of a problem with your mouse is that the cursor movement is suddenly erratic or not in accordance with the mouse command, sometimes even not moving at all. This problem can be solved with one or more fixes. see the following reviews,

Check Your Mouse Surface

Check your mouse pad first, a mouse pad that is too shiny, too rough or wet can hinder the sensitivity of your mouse. Try changing the mouse pad accordingly to see if changing the surface solves the problem. Another problem could be the color of the surface. Colors such as red, purple, and solid black can also interfere with mouse sensitivity.

Check USB Dongle/Reset

Problems can also arise from an undetected dongle on the computer. Optionally, remove it and wait a few seconds after that try inserting it into a different USB port. Allow Windows to detect and retest.

Check Mouse Battery

Most wireless mice have a component underneath that houses the battery. Turn the mouse over and check if the battery is still in good condition, remove the battery and make sure it is clean and free of dirt and reinstall it.

Some wireless mice have an On/Off button underneath to help conserve battery life. Check to make sure that yours is turned on and not accidentally turned off.

Change the battery

if the previous method has been done and there is no effect on the mouse problem. The second option is to replace the battery. The method is still the same as before, open the compartment under the mouse, remove the battery and install a new one.

If your mouse is working normally again, great. However, if the problem is not solved continue to follow the next instructions.

Clean Inner Components

Follow the following process to open the mouse cover;

  • make sure the mouse is off and the battery is removed, loosen and remove the screws holding the mouse in place, usually just one or two.
  • Next, pull the mouse carefully, you may need to use a special screwdriver to release the retaining clip on the inside of the mouse cover.
  • Now, gently remove the dirt and clean the mouse track wheel and internal components with a cotton ball, rag or microfiber cloth and a small amount of rubbing alcohol (drop a small amount on the cloth).
  • After letting the inside of the mouse dry for a few seconds, the alcohol evaporates quickly, plug the mouse back in, then turn it on again.
  • Finally, test to see if everything works fine.
  • Reboot Your Computer.

Check Your Driver

If the steps above still can’t find the problem with the mouse, it could be a problem with the driver itself. We will first let Windows do the driver detection and then install the drivers manually if necessary.

Here’s how to check drivers in Windows, use touchped if using a laptop or use keyboard as navigation;

  • Type ‘dev‘ into the Windows Search box or right-click the icon Start and select Device Manager.
  • Now, go down and select Mouse and devices, select Update driver to perform the update.
  • If Windows doesn’t find a driver update, you can try a manual installation.
  • Navigate to the mouse manufacturer’s website and download the latest driver for your mouse.
  • Install it on your computer and follow the prompts.
  • Reboot if needed and retest.

These are some of the steps you have to take to Solving Wireless Mouse Not Working. Hopefully the above explanation can help you in simplifying your daily activities. For those of you, who want to find more information about games, technology, more tips and tricks, just click here Amelinus.

Categorized in: